Pennsylvania Well Records › Berks County › Reading (19610)
Reading, PA (19610): well depth, water level & drilling cost
✓ 97 PaGWIS records · Berks County
Pull every recorded well near a Reading (19610) address — $49
How deep are wells in Reading (19610), Pennsylvania?
The median drilled well depth in Reading (19610) is 143 ft, based on 92 wells with recorded depths in the state PaGWIS database. Half fall between 88 ft and 243 ft; 90% are shallower than 354 ft.
How much does it cost to drill a well in Reading (19610)?
Applying published per-foot rates to the local median depth of 143 ft: drilling and casing alone typically runs $3,575–$9,295; a complete system including pump, pressure tank, and hookup typically runs $8,580–$14,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Reading (19610)?
The median static water level is 60 ft below ground surface (middle half of wells: 39 ft–73 ft), from 13 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Berks County.
Part of Berks County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.