⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Berks County › Mohrsville (19541)

Mohrsville, PA (19541): well depth, water level & drilling cost

✓ 174 PaGWIS records · Berks County

200 ftmedian well depth
128 ft–250 fttypical depth range
60 ftmedian static water level
16 gpmmedian yield (100 tests)

Pull every recorded well near a Mohrsville (19541) address — $49

How deep are wells in and around Mohrsville (19541), Pennsylvania?

The median drilled well depth in and around Mohrsville (19541) is 200 ft, based on 141 wells with recorded depths in the state PaGWIS database. Half fall between 128 ft and 250 ft; 90% are shallower than 360 ft.

How much does it cost to drill a well in and around Mohrsville (19541)?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Mohrsville (19541)?

The median static water level is 60 ft below ground surface (middle half of wells: 35 ft–105 ft), from 50 measurements.

Drilled depth distribution

0–50 ft 9 50–100 ft 7 100–150 ft 29 150–200 ft 24 200–300 ft 44 300–400 ft 19 400–600 ft 6 600+ ft 3
Looking at a specific property in Mohrsville (19541)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Mohrsville (19541)

Free. Goes to licensed drillers working Berks County.

Part of Berks County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.