⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Montgomery County › Frederick (19435)

Frederick, PA (19435): well depth, water level & drilling cost

✓ 157 PaGWIS records · Montgomery County

150 ftmedian well depth
95 ft–260 fttypical depth range
20 ftmedian static water level
15 gpmmedian yield (119 tests)

Pull every recorded well near a Frederick (19435) address — $49

How deep are wells in and around Frederick (19435), Pennsylvania?

The median drilled well depth in and around Frederick (19435) is 150 ft, based on 157 wells with recorded depths in the state PaGWIS database. Half fall between 95 ft and 260 ft; 90% are shallower than 400 ft.

How much does it cost to drill a well in and around Frederick (19435)?

Applying published per-foot rates to the local median depth of 150 ft: drilling and casing alone typically runs $3,750–$9,750; a complete system including pump, pressure tank, and hookup typically runs $9,000–$15,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Frederick (19435)?

The median static water level is 20 ft below ground surface (middle half of wells: 10 ft–39 ft), from 80 measurements.

Drilled depth distribution

0–50 ft 28 50–100 ft 18 100–150 ft 26 150–200 ft 28 200–300 ft 28 300–400 ft 11 400–600 ft 11 600+ ft 7
Looking at a specific property in Frederick (19435)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Frederick (19435)

Free. Goes to licensed drillers working Montgomery County.

Part of Montgomery County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.