Pennsylvania Well Records › Delaware County › Baltimore Pike (19070)
Baltimore Pike, PA (19070): well depth, water level & drilling cost
✓ 126 PaGWIS records · Delaware County
Pull every recorded well near a Baltimore Pike (19070) address — $49
How deep are wells in Baltimore Pike (19070), Pennsylvania?
The median drilled well depth in Baltimore Pike (19070) is 25 ft, based on 64 wells with recorded depths in the state PaGWIS database. Half fall between 17 ft and 30 ft; 90% are shallower than 178 ft.
How much does it cost to drill a well in Baltimore Pike (19070)?
Applying published per-foot rates to the local median depth of 25 ft: drilling and casing alone typically runs $625–$1,625; a complete system including pump, pressure tank, and hookup typically runs $1,500–$2,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Baltimore Pike (19070)?
The median static water level is 9 ft below ground surface (middle half of wells: 7 ft–12 ft), from 6 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Delaware County.
Part of Delaware County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.