Pennsylvania Well Records › Montgomery County › Fort Washington (19034)
Fort Washington, PA (19034): well depth, water level & drilling cost
✓ 242 PaGWIS records · Montgomery County
Pull every recorded well near a Fort Washington (19034) address — $49
How deep are wells in Fort Washington (19034), Pennsylvania?
The median drilled well depth in Fort Washington (19034) is 37 ft, based on 231 wells with recorded depths in the state PaGWIS database. Half fall between 20 ft and 150 ft; 90% are shallower than 273 ft.
How much does it cost to drill a well in Fort Washington (19034)?
Applying published per-foot rates to the local median depth of 37 ft: drilling and casing alone typically runs $925–$2,405; a complete system including pump, pressure tank, and hookup typically runs $2,220–$3,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Fort Washington (19034)?
The median static water level is 9 ft below ground surface (middle half of wells: 5 ft–40 ft), from 88 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Montgomery County.
Part of Montgomery County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.