⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Bucks County › Milford Square (18935)

Milford Square, PA (18935): well depth, water level & drilling cost

✓ 76 PaGWIS records · Bucks County

140 ftmedian well depth
108 ft–215 fttypical depth range
28 ftmedian static water level
20 gpmmedian yield (63 tests)

Pull every recorded well near a Milford Square (18935) address — $49

How deep are wells in and around Milford Square (18935), Pennsylvania?

The median drilled well depth in and around Milford Square (18935) is 140 ft, based on 70 wells with recorded depths in the state PaGWIS database. Half fall between 108 ft and 215 ft; 90% are shallower than 300 ft.

How much does it cost to drill a well in and around Milford Square (18935)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Milford Square (18935)?

The median static water level is 28 ft below ground surface (middle half of wells: 20 ft–40 ft), from 26 measurements.

Drilled depth distribution

0–50 ft 3 50–100 ft 5 100–150 ft 32 150–200 ft 9 200–300 ft 13 300–400 ft 7 400–600 ft 1 600+ ft 0
Looking at a specific property in Milford Square (18935)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Milford Square (18935)

Free. Goes to licensed drillers working Bucks County.

Part of Bucks County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.