Pennsylvania Well Records › Bradford County › Stevensville (18845)
Stevensville, PA (18845): well depth, water level & drilling cost
✓ 101 PaGWIS records · Bradford County
Pull every recorded well near a Stevensville (18845) address — $49
How deep are wells in and around Stevensville (18845), Pennsylvania?
The median drilled well depth in and around Stevensville (18845) is 170 ft, based on 66 wells with recorded depths in the state PaGWIS database. Half fall between 44 ft and 261 ft; 90% are shallower than 335 ft.
How much does it cost to drill a well in and around Stevensville (18845)?
Applying published per-foot rates to the local median depth of 170 ft: drilling and casing alone typically runs $4,250–$11,050; a complete system including pump, pressure tank, and hookup typically runs $10,200–$17,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Stevensville (18845)?
The median static water level is 75 ft below ground surface (middle half of wells: 60 ft–100 ft), from 25 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Bradford County.
Part of Bradford County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.