⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Pike County › Dingmans Ferry (18328)

Dingmans Ferry, PA (18328): well depth, water level & drilling cost

✓ 712 PaGWIS records · Pike County

239 ftmedian well depth
155 ft–348 fttypical depth range
50 ftmedian static water level
10 gpmmedian yield (617 tests)

Pull every recorded well near a Dingmans Ferry (18328) address — $49

How deep are wells in and around Dingmans Ferry (18328), Pennsylvania?

The median drilled well depth in and around Dingmans Ferry (18328) is 239 ft, based on 690 wells with recorded depths in the state PaGWIS database. Half fall between 155 ft and 348 ft; 90% are shallower than 498 ft.

How much does it cost to drill a well in and around Dingmans Ferry (18328)?

Applying published per-foot rates to the local median depth of 239 ft: drilling and casing alone typically runs $5,975–$15,535; a complete system including pump, pressure tank, and hookup typically runs $14,340–$23,900. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Dingmans Ferry (18328)?

The median static water level is 50 ft below ground surface (middle half of wells: 30 ft–77 ft), from 442 measurements.

Drilled depth distribution

0–50 ft 41 50–100 ft 24 100–150 ft 89 150–200 ft 95 200–300 ft 174 300–400 ft 122 400–600 ft 112 600+ ft 33
Looking at a specific property in Dingmans Ferry (18328)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Dingmans Ferry (18328)

Free. Goes to licensed drillers working Pike County.

Part of Pike County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.