Pennsylvania Well Records › Lehigh County › Allentown (18195)
Allentown, PA (18195): well depth, water level & drilling cost
✓ 60 PaGWIS records · Lehigh County
Pull every recorded well near a Allentown (18195) address — $49
How deep are wells in and around Allentown (18195), Pennsylvania?
The median drilled well depth in and around Allentown (18195) is 200 ft, based on 58 wells with recorded depths in the state PaGWIS database. Half fall between 145 ft and 252 ft; 90% are shallower than 372 ft.
How much does it cost to drill a well in and around Allentown (18195)?
Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Allentown (18195)?
The median static water level is 70 ft below ground surface (middle half of wells: 45 ft–150 ft), from 13 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Lehigh County.
Part of Lehigh County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.