Pennsylvania Well Records › Snyder County › Beaver Springs (17812)
Beaver Springs, PA (17812): well depth, water level & drilling cost
✓ 242 PaGWIS records · Snyder County
Pull every recorded well near a Beaver Springs (17812) address — $49
How deep are wells in Beaver Springs (17812), Pennsylvania?
The median drilled well depth in Beaver Springs (17812) is 351 ft, based on 237 wells with recorded depths in the state PaGWIS database. Half fall between 97 ft and 425 ft; 90% are shallower than 425 ft.
How much does it cost to drill a well in Beaver Springs (17812)?
Applying published per-foot rates to the local median depth of 351 ft: drilling and casing alone typically runs $8,775–$22,815; a complete system including pump, pressure tank, and hookup typically runs $21,060–$35,100. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Beaver Springs (17812)?
The median static water level is 30 ft below ground surface (middle half of wells: 15 ft–60 ft), from 47 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Snyder County.
Part of Snyder County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.