⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Lycoming County › Montgomery (17752)

Montgomery, PA (17752): well depth, water level & drilling cost

✓ 261 PaGWIS records · Lycoming County

132 ftmedian well depth
62 ft–242 fttypical depth range
17 ftmedian static water level
18 gpmmedian yield (173 tests)

Pull every recorded well near a Montgomery (17752) address — $49

How deep are wells in and around Montgomery (17752), Pennsylvania?

The median drilled well depth in and around Montgomery (17752) is 132 ft, based on 248 wells with recorded depths in the state PaGWIS database. Half fall between 62 ft and 242 ft; 90% are shallower than 380 ft.

How much does it cost to drill a well in and around Montgomery (17752)?

Applying published per-foot rates to the local median depth of 132 ft: drilling and casing alone typically runs $3,300–$8,580; a complete system including pump, pressure tank, and hookup typically runs $7,920–$13,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Montgomery (17752)?

The median static water level is 17 ft below ground surface (middle half of wells: 10 ft–40 ft), from 37 measurements.

Drilled depth distribution

0–50 ft 58 50–100 ft 34 100–150 ft 46 150–200 ft 28 200–300 ft 34 300–400 ft 27 400–600 ft 19 600+ ft 2
Looking at a specific property in Montgomery (17752)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Montgomery (17752)

Free. Goes to licensed drillers working Lycoming County.

Part of Lycoming County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.