Pennsylvania Well Records › Lycoming County › Cedar Run (17727)
Cedar Run, PA (17727): well depth, water level & drilling cost
✓ 77 PaGWIS records · Lycoming County
Pull every recorded well near a Cedar Run (17727) address — $49
How deep are wells in Cedar Run (17727), Pennsylvania?
The median drilled well depth in Cedar Run (17727) is 151 ft, based on 71 wells with recorded depths in the state PaGWIS database. Half fall between 90 ft and 202 ft; 90% are shallower than 300 ft.
How much does it cost to drill a well in Cedar Run (17727)?
Applying published per-foot rates to the local median depth of 151 ft: drilling and casing alone typically runs $3,775–$9,815; a complete system including pump, pressure tank, and hookup typically runs $9,060–$15,100. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Cedar Run (17727)?
The median static water level is 70 ft below ground surface (middle half of wells: 35 ft–100 ft), from 49 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Lycoming County.
Part of Lycoming County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.