⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Lycoming County › Williamsport (17705)

Williamsport, PA (17705): well depth, water level & drilling cost

✓ 117 PaGWIS records · Lycoming County

200 ftmedian well depth
125 ft–267 fttypical depth range
56 ftmedian static water level
8 gpmmedian yield (89 tests)

Pull every recorded well near a Williamsport (17705) address — $49

How deep are wells in and around Williamsport (17705), Pennsylvania?

The median drilled well depth in and around Williamsport (17705) is 200 ft, based on 102 wells with recorded depths in the state PaGWIS database. Half fall between 125 ft and 267 ft; 90% are shallower than 340 ft.

How much does it cost to drill a well in and around Williamsport (17705)?

Applying published per-foot rates to the local median depth of 200 ft: drilling and casing alone typically runs $5,000–$13,000; a complete system including pump, pressure tank, and hookup typically runs $12,000–$20,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Williamsport (17705)?

The median static water level is 56 ft below ground surface (middle half of wells: 31 ft–70 ft), from 46 measurements.

Drilled depth distribution

0–50 ft 7 50–100 ft 9 100–150 ft 16 150–200 ft 15 200–300 ft 32 300–400 ft 16 400–600 ft 6 600+ ft 1
Looking at a specific property in Williamsport (17705)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Williamsport (17705)

Free. Goes to licensed drillers working Lycoming County.

Part of Lycoming County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.