⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Lancaster County › Silver Spring (17575)

Silver Spring, PA (17575): well depth, water level & drilling cost

✓ 106 PaGWIS records · Lancaster County

80 ftmedian well depth
32 ft–150 fttypical depth range
32 ftmedian static water level
10 gpmmedian yield (51 tests)

Pull every recorded well near a Silver Spring (17575) address — $49

How deep are wells in and around Silver Spring (17575), Pennsylvania?

The median drilled well depth in and around Silver Spring (17575) is 80 ft, based on 91 wells with recorded depths in the state PaGWIS database. Half fall between 32 ft and 150 ft; 90% are shallower than 250 ft.

How much does it cost to drill a well in and around Silver Spring (17575)?

Applying published per-foot rates to the local median depth of 80 ft: drilling and casing alone typically runs $2,000–$5,200; a complete system including pump, pressure tank, and hookup typically runs $4,800–$8,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Silver Spring (17575)?

The median static water level is 32 ft below ground surface (middle half of wells: 29 ft–39 ft), from 7 measurements.

Drilled depth distribution

0–50 ft 36 50–100 ft 16 100–150 ft 13 150–200 ft 11 200–300 ft 7 300–400 ft 3 400–600 ft 5 600+ ft 0
Looking at a specific property in Silver Spring (17575)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Silver Spring (17575)

Free. Goes to licensed drillers working Lancaster County.

Part of Lancaster County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.