⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Lancaster County › Goodville (17528)

Goodville, PA (17528): well depth, water level & drilling cost

✓ 78 PaGWIS records · Lancaster County

221 ftmedian well depth
140 ft–318 fttypical depth range
40 ftmedian static water level
9 gpmmedian yield (68 tests)

Pull every recorded well near a Goodville (17528) address — $49

How deep are wells in and around Goodville (17528), Pennsylvania?

The median drilled well depth in and around Goodville (17528) is 221 ft, based on 76 wells with recorded depths in the state PaGWIS database. Half fall between 140 ft and 318 ft; 90% are shallower than 511 ft.

How much does it cost to drill a well in and around Goodville (17528)?

Applying published per-foot rates to the local median depth of 221 ft: drilling and casing alone typically runs $5,525–$14,365; a complete system including pump, pressure tank, and hookup typically runs $13,260–$22,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Goodville (17528)?

The median static water level is 40 ft below ground surface (middle half of wells: 30 ft–50 ft), from 35 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 7 100–150 ft 14 150–200 ft 10 200–300 ft 19 300–400 ft 12 400–600 ft 9 600+ ft 4
Looking at a specific property in Goodville (17528)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Goodville (17528)

Free. Goes to licensed drillers working Lancaster County.

Part of Lancaster County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.