⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Franklin County › State Line (17263)

State Line, PA (17263): well depth, water level & drilling cost

✓ 396 PaGWIS records · Franklin County

201 ftmedian well depth
113 ft–322 fttypical depth range
29 ftmedian static water level
10 gpmmedian yield (317 tests)

Pull every recorded well near a State Line (17263) address — $49

How deep are wells in and around State Line (17263), Pennsylvania?

The median drilled well depth in and around State Line (17263) is 201 ft, based on 382 wells with recorded depths in the state PaGWIS database. Half fall between 113 ft and 322 ft; 90% are shallower than 459 ft.

How much does it cost to drill a well in and around State Line (17263)?

Applying published per-foot rates to the local median depth of 201 ft: drilling and casing alone typically runs $5,025–$13,065; a complete system including pump, pressure tank, and hookup typically runs $12,060–$20,100. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around State Line (17263)?

The median static water level is 29 ft below ground surface (middle half of wells: 20 ft–40 ft), from 112 measurements.

Drilled depth distribution

0–50 ft 7 50–100 ft 63 100–150 ft 67 150–200 ft 48 200–300 ft 83 300–400 ft 52 400–600 ft 48 600+ ft 14
Looking at a specific property in State Line (17263)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in State Line (17263)

Free. Goes to licensed drillers working Franklin County.

Part of Franklin County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.