⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Mifflin County › Reedsville (17084)

Reedsville, PA (17084): well depth, water level & drilling cost

✓ 170 PaGWIS records · Mifflin County

220 ftmedian well depth
179 ft–280 fttypical depth range
60 ftmedian static water level
15 gpmmedian yield (140 tests)

Pull every recorded well near a Reedsville (17084) address — $49

How deep are wells in and around Reedsville (17084), Pennsylvania?

The median drilled well depth in and around Reedsville (17084) is 220 ft, based on 153 wells with recorded depths in the state PaGWIS database. Half fall between 179 ft and 280 ft; 90% are shallower than 416 ft.

How much does it cost to drill a well in and around Reedsville (17084)?

Applying published per-foot rates to the local median depth of 220 ft: drilling and casing alone typically runs $5,500–$14,300; a complete system including pump, pressure tank, and hookup typically runs $13,200–$22,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Reedsville (17084)?

The median static water level is 60 ft below ground surface (middle half of wells: 40 ft–106 ft), from 38 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 6 100–150 ft 20 150–200 ft 24 200–300 ft 68 300–400 ft 17 400–600 ft 13 600+ ft 5
Looking at a specific property in Reedsville (17084)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Reedsville (17084)

Free. Goes to licensed drillers working Mifflin County.

Part of Mifflin County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.