Pennsylvania Well Records › Juniata County › Oakland Mills (17076)
Oakland Mills, PA (17076): well depth, water level & drilling cost
✓ 89 PaGWIS records · Juniata County
Pull every recorded well near a Oakland Mills (17076) address — $49
How deep are wells in and around Oakland Mills (17076), Pennsylvania?
The median drilled well depth in and around Oakland Mills (17076) is 152 ft, based on 86 wells with recorded depths in the state PaGWIS database. Half fall between 82 ft and 250 ft; 90% are shallower than 400 ft.
How much does it cost to drill a well in and around Oakland Mills (17076)?
Applying published per-foot rates to the local median depth of 152 ft: drilling and casing alone typically runs $3,800–$9,880; a complete system including pump, pressure tank, and hookup typically runs $9,120–$15,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Oakland Mills (17076)?
The median static water level is 30 ft below ground surface (middle half of wells: 10 ft–60 ft), from 21 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Juniata County.
Part of Juniata County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.