Pennsylvania Well Records › Cumberland County › Boiling Springs (17007)
Boiling Springs, PA (17007): well depth, water level & drilling cost
✓ 478 PaGWIS records · Cumberland County
Pull every recorded well near a Boiling Springs (17007) address — $49
How deep are wells in and around Boiling Springs (17007), Pennsylvania?
The median drilled well depth in and around Boiling Springs (17007) is 153 ft, based on 439 wells with recorded depths in the state PaGWIS database. Half fall between 100 ft and 245 ft; 90% are shallower than 328 ft.
How much does it cost to drill a well in and around Boiling Springs (17007)?
Applying published per-foot rates to the local median depth of 153 ft: drilling and casing alone typically runs $3,825–$9,945; a complete system including pump, pressure tank, and hookup typically runs $9,180–$15,300. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Boiling Springs (17007)?
The median static water level is 45 ft below ground surface (middle half of wells: 30 ft–61 ft), from 176 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Cumberland County.
Part of Cumberland County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.