Pennsylvania Well Records › Mckean County › Port Allegany (16743)
Port Allegany, PA (16743): well depth, water level & drilling cost
✓ 146 PaGWIS records · Mckean County
Pull every recorded well near a Port Allegany (16743) address — $49
How deep are wells in Port Allegany (16743), Pennsylvania?
The median drilled well depth in Port Allegany (16743) is 98 ft, based on 134 wells with recorded depths in the state PaGWIS database. Half fall between 56 ft and 142 ft; 90% are shallower than 200 ft.
How much does it cost to drill a well in Port Allegany (16743)?
Applying published per-foot rates to the local median depth of 98 ft: drilling and casing alone typically runs $2,450–$6,370; a complete system including pump, pressure tank, and hookup typically runs $5,880–$9,800. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Port Allegany (16743)?
The median static water level is 35 ft below ground surface (middle half of wells: 20 ft–60 ft), from 81 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Mckean County.
Part of Mckean County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.