Pennsylvania Well Records › Bedford County › Imler (16655)
Imler, PA (16655): well depth, water level & drilling cost
✓ 207 PaGWIS records · Bedford County
Pull every recorded well near a Imler (16655) address — $49
How deep are wells in Imler (16655), Pennsylvania?
The median drilled well depth in Imler (16655) is 160 ft, based on 205 wells with recorded depths in the state PaGWIS database. Half fall between 80 ft and 264 ft; 90% are shallower than 406 ft.
How much does it cost to drill a well in Imler (16655)?
Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Imler (16655)?
The median static water level is 32 ft below ground surface (middle half of wells: 15 ft–80 ft), from 132 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Bedford County.
Part of Bedford County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.