⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Crawford County › Springboro (16435)

Springboro, PA (16435): well depth, water level & drilling cost

✓ 291 PaGWIS records · Crawford County

50 ftmedian well depth
44 ft–65 fttypical depth range
10 ftmedian static water level
5 gpmmedian yield (268 tests)

Pull every recorded well near a Springboro (16435) address — $49

How deep are wells in and around Springboro (16435), Pennsylvania?

The median drilled well depth in and around Springboro (16435) is 50 ft, based on 290 wells with recorded depths in the state PaGWIS database. Half fall between 44 ft and 65 ft; 90% are shallower than 83 ft.

How much does it cost to drill a well in and around Springboro (16435)?

Applying published per-foot rates to the local median depth of 50 ft: drilling and casing alone typically runs $1,250–$3,250; a complete system including pump, pressure tank, and hookup typically runs $3,000–$5,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Springboro (16435)?

The median static water level is 10 ft below ground surface (middle half of wells: 6 ft–16 ft), from 117 measurements.

Drilled depth distribution

0–50 ft 99 50–100 ft 174 100–150 ft 13 150–200 ft 2 200–300 ft 2 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Springboro (16435)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Springboro (16435)

Free. Goes to licensed drillers working Crawford County.

Part of Crawford County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.