⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Crawford County › Harmonsburg (16422)

Harmonsburg, PA (16422): well depth, water level & drilling cost

✓ 391 PaGWIS records · Crawford County

82 ftmedian well depth
60 ft–110 fttypical depth range
20 ftmedian static water level
15 gpmmedian yield (375 tests)

Pull every recorded well near a Harmonsburg (16422) address — $49

How deep are wells in and around Harmonsburg (16422), Pennsylvania?

The median drilled well depth in and around Harmonsburg (16422) is 82 ft, based on 384 wells with recorded depths in the state PaGWIS database. Half fall between 60 ft and 110 ft; 90% are shallower than 140 ft.

How much does it cost to drill a well in and around Harmonsburg (16422)?

Applying published per-foot rates to the local median depth of 82 ft: drilling and casing alone typically runs $2,050–$5,330; a complete system including pump, pressure tank, and hookup typically runs $4,920–$8,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Harmonsburg (16422)?

The median static water level is 20 ft below ground surface (middle half of wells: 10 ft–37 ft), from 156 measurements.

Drilled depth distribution

0–50 ft 50 50–100 ft 201 100–150 ft 103 150–200 ft 27 200–300 ft 3 300–400 ft 0 400–600 ft 0 600+ ft 0
Looking at a specific property in Harmonsburg (16422)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Harmonsburg (16422)

Free. Goes to licensed drillers working Crawford County.

Part of Crawford County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.