Pennsylvania Well Records › Warren County › Russell (16345)
Russell, PA (16345): well depth, water level & drilling cost
✓ 491 PaGWIS records · Warren County
Pull every recorded well near a Russell (16345) address — $49
How deep are wells in Russell (16345), Pennsylvania?
The median drilled well depth in Russell (16345) is 107 ft, based on 471 wells with recorded depths in the state PaGWIS database. Half fall between 67 ft and 152 ft; 90% are shallower than 200 ft.
How much does it cost to drill a well in Russell (16345)?
Applying published per-foot rates to the local median depth of 107 ft: drilling and casing alone typically runs $2,675–$6,955; a complete system including pump, pressure tank, and hookup typically runs $6,420–$10,700. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Russell (16345)?
The median static water level is 40 ft below ground surface (middle half of wells: 23 ft–70 ft), from 411 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Warren County.
Part of Warren County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.