⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Mercer County › Clarks Mills (16114)

Clarks Mills, PA (16114): well depth, water level & drilling cost

✓ 228 PaGWIS records · Mercer County

75 ftmedian well depth
50 ft–115 fttypical depth range
28 ftmedian static water level
30 gpmmedian yield (142 tests)

Pull every recorded well near a Clarks Mills (16114) address — $49

How deep are wells in and around Clarks Mills (16114), Pennsylvania?

The median drilled well depth in and around Clarks Mills (16114) is 75 ft, based on 222 wells with recorded depths in the state PaGWIS database. Half fall between 50 ft and 115 ft; 90% are shallower than 180 ft.

How much does it cost to drill a well in and around Clarks Mills (16114)?

Applying published per-foot rates to the local median depth of 75 ft: drilling and casing alone typically runs $1,875–$4,875; a complete system including pump, pressure tank, and hookup typically runs $4,500–$7,500. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Clarks Mills (16114)?

The median static water level is 28 ft below ground surface (middle half of wells: 17 ft–49 ft), from 147 measurements.

Drilled depth distribution

0–50 ft 52 50–100 ft 100 100–150 ft 36 150–200 ft 17 200–300 ft 9 300–400 ft 2 400–600 ft 4 600+ ft 2
Looking at a specific property in Clarks Mills (16114)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Clarks Mills (16114)

Free. Goes to licensed drillers working Mercer County.

Part of Mercer County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.