⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Butler County › Renfrew (16053)

Renfrew, PA (16053): well depth, water level & drilling cost

✓ 278 PaGWIS records · Butler County

166 ftmedian well depth
125 ft–213 fttypical depth range
80 ftmedian static water level
20 gpmmedian yield (248 tests)

Pull every recorded well near a Renfrew (16053) address — $49

How deep are wells in and around Renfrew (16053), Pennsylvania?

The median drilled well depth in and around Renfrew (16053) is 166 ft, based on 264 wells with recorded depths in the state PaGWIS database. Half fall between 125 ft and 213 ft; 90% are shallower than 252 ft.

How much does it cost to drill a well in and around Renfrew (16053)?

Applying published per-foot rates to the local median depth of 166 ft: drilling and casing alone typically runs $4,150–$10,790; a complete system including pump, pressure tank, and hookup typically runs $9,960–$16,600. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Renfrew (16053)?

The median static water level is 80 ft below ground surface (middle half of wells: 50 ft–116 ft), from 220 measurements.

Drilled depth distribution

0–50 ft 6 50–100 ft 24 100–150 ft 73 150–200 ft 62 200–300 ft 84 300–400 ft 12 400–600 ft 3 600+ ft 0
Looking at a specific property in Renfrew (16053)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Renfrew (16053)

Free. Goes to licensed drillers working Butler County.

Part of Butler County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.