⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Jefferson County › Stump Creek (15863)

Stump Creek, PA (15863): well depth, water level & drilling cost

✓ 75 PaGWIS records · Jefferson County

140 ftmedian well depth
84 ft–189 fttypical depth range
58 ftmedian static water level
8 gpmmedian yield (44 tests)

Pull every recorded well near a Stump Creek (15863) address — $49

How deep are wells in and around Stump Creek (15863), Pennsylvania?

The median drilled well depth in and around Stump Creek (15863) is 140 ft, based on 55 wells with recorded depths in the state PaGWIS database. Half fall between 84 ft and 189 ft; 90% are shallower than 250 ft.

How much does it cost to drill a well in and around Stump Creek (15863)?

Applying published per-foot rates to the local median depth of 140 ft: drilling and casing alone typically runs $3,500–$9,100; a complete system including pump, pressure tank, and hookup typically runs $8,400–$14,000. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Stump Creek (15863)?

The median static water level is 58 ft below ground surface (middle half of wells: 55 ft–92 ft), from 6 measurements.

Drilled depth distribution

0–50 ft 1 50–100 ft 14 100–150 ft 14 150–200 ft 13 200–300 ft 10 300–400 ft 3 400–600 ft 0 600+ ft 0
Looking at a specific property in Stump Creek (15863)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Stump Creek (15863)

Free. Goes to licensed drillers working Jefferson County.

Part of Jefferson County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.