⟁ Pennsylvania Well Records field records · 2026 survey

Pennsylvania Well Records › Fulton County › Crystal Spring (15536)

Crystal Spring, PA (15536): well depth, water level & drilling cost

✓ 104 PaGWIS records · Fulton County

232 ftmedian well depth
181 ft–304 fttypical depth range
50 ftmedian static water level
12 gpmmedian yield (100 tests)

Pull every recorded well near a Crystal Spring (15536) address — $49

How deep are wells in and around Crystal Spring (15536), Pennsylvania?

The median drilled well depth in and around Crystal Spring (15536) is 232 ft, based on 100 wells with recorded depths in the state PaGWIS database. Half fall between 181 ft and 304 ft; 90% are shallower than 354 ft.

How much does it cost to drill a well in and around Crystal Spring (15536)?

Applying published per-foot rates to the local median depth of 232 ft: drilling and casing alone typically runs $5,800–$15,080; a complete system including pump, pressure tank, and hookup typically runs $13,920–$23,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Crystal Spring (15536)?

The median static water level is 50 ft below ground surface (middle half of wells: 30 ft–80 ft), from 79 measurements.

Drilled depth distribution

0–50 ft 0 50–100 ft 5 100–150 ft 15 150–200 ft 10 200–300 ft 40 300–400 ft 23 400–600 ft 5 600+ ft 2
Looking at a specific property in Crystal Spring (15536)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Crystal Spring (15536)

Free. Goes to licensed drillers working Fulton County.

Part of Fulton County well records.

Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.