Pennsylvania Well Records › Allegheny County › Natrona Heights (15065)
Natrona Heights, PA (15065): well depth, water level & drilling cost
✓ 85 PaGWIS records · Allegheny County
Pull every recorded well near a Natrona Heights (15065) address — $49
How deep are wells in Natrona Heights (15065), Pennsylvania?
The median drilled well depth in Natrona Heights (15065) is 98 ft, based on 76 wells with recorded depths in the state PaGWIS database. Half fall between 58 ft and 168 ft; 90% are shallower than 219 ft.
How much does it cost to drill a well in Natrona Heights (15065)?
Applying published per-foot rates to the local median depth of 98 ft: drilling and casing alone typically runs $2,450–$6,370; a complete system including pump, pressure tank, and hookup typically runs $5,880–$9,800. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Natrona Heights (15065)?
The median static water level is 63 ft below ground surface (middle half of wells: 33 ft–102 ft), from 30 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Allegheny County.
Part of Allegheny County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.