Pennsylvania Well Records › Beaver County › Ambridge (15003)
Ambridge, PA (15003): well depth, water level & drilling cost
✓ 139 PaGWIS records · Beaver County
Pull every recorded well near a Ambridge (15003) address — $49
How deep are wells in Ambridge (15003), Pennsylvania?
The median drilled well depth in Ambridge (15003) is 79 ft, based on 138 wells with recorded depths in the state PaGWIS database. Half fall between 39 ft and 95 ft; 90% are shallower than 200 ft.
How much does it cost to drill a well in Ambridge (15003)?
Applying published per-foot rates to the local median depth of 79 ft: drilling and casing alone typically runs $1,975–$5,135; a complete system including pump, pressure tank, and hookup typically runs $4,740–$7,900. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Ambridge (15003)?
The median static water level is 65 ft below ground surface (middle half of wells: 14 ft–70 ft), from 74 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Beaver County.
Part of Beaver County well records.
Method: medians computed from PaGWIS records (PaGWIS water wells; wells recorded solely as monitoring, observation, geothermal, injection or oil-and-gas holes are excluded, as are the few records the state labels a tunnel, drain, sinkhole or pond; depths 0-5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.